Hidro SouthEast Queensland Gravity Generators 50MW for 3.75M$AU

http://peswiki.com/index.php/Directory:_Hidro_--_Water_Pressures_Energy_Conversion_(WAPEC)

Hidro looks to be a method of extraction of energy from gravity using the change in pressure of water.
I Look forward to hearing of developments in extracting energy from gravity. Gravity has a much better capacity to supply safely and long term as force is proportional to inverse distance squared. Current methods of linear (VP/T) ambient temperature heat exchange ie modern combustion can not sustain the allowable limits of vehicles and industry. Gravity has a much larger availability for extraction from the environment than temperature heat exchanged to the atmosphere and is safer environmentally.
I am curious to see if Hidro becomes open source at some stage. I gather that the "energy must be free" hypothesis must be true for humanity to become sustainable.

Multi Dipole Magnetic Simulation

Introduction

Multi Dipole Simulation of two bar magnets one attached to a wheel the other to a fixed point external to the wheel. Each magnet consists of 5 dipoles at 1cm distance apart for a total of 5cm length per magnet. The magnets are at 0 degrees and 180 degrees respectively.
The strength of the magnets are 0.01 Amperes per meter squared(A/m^2).

Multi Dipole simulation omega=180 degrees phi=0
Disk Mass 1.2kg 25cm in diameter
Bar Magnets Length 5cm
Dipole Length 1cm
Added Friction from normal of force

Program Code

N=5000;
Kfriction=0.01;
m=0.01;
M=0.01;
R=0.25;

Uo=4e-7*%pi;
L=0.01;
I=2;
J=2;
d=(I+J)*L+0.05;
phi=0.0*%pi;
omega=1.0*%pi;
rot_v=0.0;
dt=0.1;
mass=1.2;
theta=1.95*%pi;
for n=1:1:N
    m1=[m*cos(theta+phi) m*sin(theta+phi)];
    m2=[M*cos(omega) M*sin(omega)];
    Fx=0.0;
    Fy=0.0;
    
    for i=-I:1:I
        for j=-J:1:J
            p1x=R*cos(theta)+j*L*cos(theta+phi);
            p1y=R*sin(theta)+j*L*sin(theta+phi);
            p2x=R+d-L*i*cos(omega);
            p2y=L*i*sin(omega);
            
            r=[p2x-p1x p2y-p1y];
            v=(3*Uo/(4*%pi*sqrt(sum(r^2))^5)*(sum(m1.*r)*m2+sum(m2.*r)*m1+sum(m1.*m2)*r-5.0*sum(m1.*r)*sum(m2.*r)/sum(r^2)*r));
            Fx=Fx+v(1);
            Fy=Fy+v(2);
           
        end
    end
    rproj=[-sin(theta) cos(theta)];
    rnorm=[cos(theta) sin(theta) ];
    Ffr=abs(Kfriction*sum([Fx Fy].*rnorm));
    Frot=sum([Fx Fy].*rproj);
    Fsign=Frot/abs(Frot);
    F=Frot-Fsign*Ffr;
    rot_v=rot_v+F*dt/(R*mass);
    theta=theta+rot_v*dt;
    th(n)=theta*180.0/%pi;
    
end

Conculsion
 Wheel is Oscillating back and forth

Magniwork Is Definitely a Scam

The fraudulent system Magniwork is preventing legitimate magnet motors from entering the market. Buyers beware any system that claims to have a working magnet motor please take heed. The problem with this scam lies mainly in the premise that magnet motors do work though the exact nature of the configuration may be difficult to construct. Therefore any site claiming to have plans and DIY cannot produce a certified device that is backed by industry.
Please Do not click on any of the Magniwork advertisements and beware of web sites that have too many ads.

Thank You

Double Pendulum

A Double Pendulum produces a chaotic output that is unstable in an ideal sense. So it makes sense that two double oscillating forces produced one from gravity and then other from magnetism can produce an over unity reaction..

Gravity meets Magnetism to produce free energy

Gravity vs Magnetism

Cluass Turtur Published a paper [1] where he mentions double oscillations and the way to produce free energy. Here the oscillators are gravity oscillation and magnetic oscillation. When used in tandem produces energy.

The following video features a machine that harnesses both magnetic and gravitational energy.